Ram Trucks UCONNECT 430 for Chrysler - Manual (Page 41)

Inserting A Disc
1. Push the LOAD button once.
2. After the screen opens, with the printed side upward,
insert the disc into the disc slot of the radio. The radio
pulls the disc automatically and closes the flip screen.
The radio selects the appropriate mode after the disc is
recognized and starts playing the first track. The
display shows “Reading...” during this process.
NOTE:
• A faulty CD is NOT automatically ejected. Use only
standard size discs. Discs that have been modified
with an adhesive label should not be used in the
CD/DVD player.
• On Data CDs with a large number of songs it may take
several seconds to read, play and display information
for all songs on the disc.
• Recording your own CD on a home computer at a
lower write speed will result in a more consistent
quality.
• High definition content and media (e.g, HD-DVD,
Blu-Ray) is not supported.
• If the user does not remove an ejected CD within
approximately 10 seconds the CD will reload.
Removing A Disc
1. Push the LOAD button.
2. After the display opens the disc is ejected and can be
removed.
NOTE: If the disc is not removed within approximately
10 seconds the unit pulls it back into the slot (park
position). The disc may be ejected when the ignition is
OFF.
40 Uconnect® MULTIMEDIA (MEDIA)