Changing the destination of the active route, Taking a detour, Stopping the route – Ram Trucks UCONNECT 430 for Chrysler User Manual

Page 96: Finding locations, Finding an address, Changing the destination of the active, Route

Advertising
background image

Changing The Destination Of The Active Route

Before you can change destinations you must be navigat-

ing a route.
1. Press

to return to the main menu.

2. Press Where To?.
3. Search for the location.
4. Press Go!.
5. Press Set as a New Destination.

Taking A Detour

While navigating a route, you can use detours to avoid

obstacles ahead of you, such as construction zones.
NOTE:

If the route you are currently taking is the only

reasonable option, the navigation system might not cal-

culate a detour.
1. While navigating a route, press

.

2. From the main menu, press Detour.

Stopping The Route

1. While navigating a route, press

.

2. From the main menu, press Stop.

FINDING LOCATIONS

The Where To? menu provides several different catego-

ries you can use to search for locations. To perform a

simple search, see the “Getting Started” section.

Finding An Address

NOTE:

Depending on the version of the built in map data

on your navigation system, the button names and the

order of steps could be different than the steps below.
1. From the main menu, press Where To? > Address.
2. If necessary, change the state, the country, or the

province.

8

NAVIGATION (Uconnect® 430N Only) 95

Advertising