Kontron CP6003-RC IPMI - Manual (Page 25)

CP6003-SA/RA/RC IPMI Firmware
ID 1045-5656, Rev. 2.0 Page 25
P R E L I M I N A R Y
7.1 Sensor List
The following table indicates all sensors available on the CP6003-SA/RA/RC. For further infor-
mation on Kontron’s OEM-specific sensor types and sensor event type codes presented in the
following table, please refer to Chapter 7.3, OEM Event/Reading Types.
Table 9: Sensor List
SENSOR NUMBER /
ID STRING
SENSOR TYPE (CODE) /
EVENT/READING TYPE
(CODE)
Ass. Mask /
Deass. Mask /
Reading Mask
DESCRIPTION
LED I1on
error /
Reading
Mask
00h /
NNN:Hot Swap Hot Swap (F0h) /
Sensor-specific (6Fh) 001Fh / 0000h /
001Fh Hot swap sensor N
01h /
NNN:Temp CPU Temperature (01h) /
Threshold (01h) 1A81h / 7A81h /
3939h CPU die temperature Y
/ 0F3Ch
02h /
NNN:Temp Chipset Temperature (01h) /
Threshold (01h) 0A80h / 7A80h /
3838 Temp Chipset Y
/ 0F3Ch
03h /
NNN:Temp Board Temperature (01h) /
Threshold (01h) 7A95h / 7A95h /
3F3F Temp Board Y
/ 0F3Ch
04h /
NNN:Pwr Good Power supply (08h) /
OEM (73h) 0000h / 0000h /
009Fh Status of all power lines N
05h /
NNN:Pwr Good Evt Power supply (08h) /
OEM (73h) 009Fh / 009Fh /
009Fh Power fail events for all
power lines Y
/ 009Fh
06h /
NNN:Board 3.3V Voltage (02h) /
Threshold (01h) 2204h / 2204h /
1212h Board 3.3V supply Y
/ 0F3Ch
07h /
NNN:Board 5VIPMI Voltage (02h) /
Threshold (01h) 2204h / 2204h /
1212h Management Power (MP)
5V Y
/ 0F3Ch
08h /
NNN:Board 5V Voltage (02h) /
Threshold (01h) 2204h / 2204h /
1212h Board 5V supply Y
/ 0F3Ch
09h /
NNN:Board 12V Voltage (02h) /
Threshold (01h) 2204h / 2204h /
1212h Board 12V supply Y
/ 0F3Ch
0Ah /
NNN:IPMB 5V Voltage (02h) /
Threshold (01h) 2204h / 2204h /
1212h IPMB 5V supply N
0Bh /
NNN:Fan1 Speed Fan (04h) /
Threshold (01h) 0000h / 0000h /
1B1Bh Speed [rpm] Fan 1 N
0Ch /
NNN:Fan2 Speed Fan (04h) /
Threshold (01h) 0000h / 0000h /
1B1Bh Speed [rpm] Fan 2 N
0Dh /
NNN:Last Reset OEM (CFh) /
“digital” Discrete (03h) 0002h / 0000h /
0003h Board reset event Y
/ 0002h
0Eh /
NNN:Slot System Entity presence (25h) /
Sensor-specific (6Fh) 0000h / 0000h /
0003h Board is in system slot
(SYSEN) N
0Fh /
NNN:PCI Present Entity presence (25h) /
Sensor-specific (6Fh) 0000h / 0000h /
0003h Board is selected (BDSEL)
and in system slot (SYSEN) N
10h /
NNN:CTCA chassis Entity presence (25h) /
Sensor-specific (6Fh) 0000h / 0000h /
0003h Value is always 1 N
11h /
NNN:IPMI WD Watchdog2 (23h) /
Sensor-specific (6Fh) 010Fh / 0000h /
010Fh IPMI Watchdog Y
/ 010Fh
12h /
NNN:IPMB State IPMB status change (F1h) /
Sensor-specific (6Fh) 000Fh / 0000h /
000Fh IPMB-0 state (refer to
PICMG 3.0 Rev 2.0, 3.8.4.1) N
13h /
NNN:ACPI State System ACPI Power State
(022h) / Sensor-specific (6Fh) 7FFFh / 0000h /
7FFFh System ACPI power state N