Kontron AT8902 Full Size CLI - Manual (Page 214)

AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 5 - 18
Mode Privileged EXEC
NOTE: It might take a while to get an output of the “show boardinfo sensors brief”
command
5.4.13 show boardinfo event-log
This command displays the event log of the board management controller. It can either
display a summary (“info”) or a list of all existing event-log records, a list with most
recent records or a single record. The <record-id> (of SEL) is displayed in the list of
records.
Format
show boardinfo event-log {info | list [last <nr-of-most-
recent-entries> | <record-id>]}
Mode Privileged EXEC
NOTE: It might take a while to get an output of the “show boardinfo event-log list”
command
5.4.14 show boardinfo update-status
This command displays the status of the firmware update process for the IPMI
controller.
Format
show boardinfo update-status
Mode Privileged EXEC
5.4.15 show boardinfo version
This command displays hardware and software revision information. This includes
serial-numbers, software and hardware revisions as applicable.
Format
show boardinfo version
Mode Privileged EXEC
Version information included
•
Base board serial number
• Mezzanine serial number
• Basic product identification (product number)
• Mezzanine product information (product number)
• IPMC firmware version and release
• FWUM firmware version
• System U-boot version and release
• System kernel version and release
• System OS release
• FASTPATH version and release
• Base board revision
• Mezzanine revision
• CPLD revision
• Broadcom Silicon revision
• Merlin revision (not implemented yet)
• Merlin CPLD revision (not implemented yet)