Kontron AT8902 Full Size CLI - Manual (Page 223)

AT8901/2/3
Page 5 - 27 AT8901/2/3 CLI Reference Manual
5.6.16 copy
The
copy
command uploads and downloads files to and from the switch. You can also
use the copy command to manage the dual images (
image1
and
image2
) on the file sys-
tem. Upload and download files from a server by using TFTP or Xmodem. Format
copy <source> <destination>
Mode Privileged EXEC
Replace the
<source>
and
<destination>
parameters with the options in Table 5.2.
For the
<url>
source or destination, use one of the following values:
{xmodem | tftp://<ipaddr>/<filepath>/<filename>}
For TFTP, the
<ipaddr>
parameter is the IP address of the server,
<filepath>
is the
path to the file, and <filename> is the name of the file you want to upload or
download.
Table 5.2. Copy Parameters
Source Destination Description
nvram:clibanner <url> Copies the CLI banner to a server.
nvram:errorlog <url> Copies the error log file to a server.
nvram:log <url> Copies the log file to a server.
nvram:script
<scriptname> <url> Copies a specified configuration script
file to a server.
nvram:startup-con-
fig <url> Copies the startup configuration to a
server.
nvram:traplog <url> Copies the trap log file to a server.
system:running-
config nvram:startup-
config Saves the running configuration to
nvram.
<url> nvram:clibanner Downloads the CLI banner to the sys-
tem.
<url> nvram:script
<destfilename> Downloads a configuration script file
to the system. During the download of
a configuration script, the copy com-
mand validates the script. In case of
any error, the command lists all the
lines at the end of the validation pro-
cess and prompts you to confirm before
copying the script file.
<url> nvram:sshkey-dsa Downloads an SSH key file. For more
information, see 6.4 “Secure Shell
(SSH) Command” on page 6 - 10.
<url> nvram:sshkey-
rsa1 Downloads an SSH key file.
<url> nvram:sshkey-
rsa2 Downloads an SSH key file.
<url> nvram:sslpem-
dhweak Downloads an HTTP secure-server cer-
tificate.