Kontron AT8060 - Manual (Page 103)

Software Setup
88 AT8060
www.kontron.com
5.1.4.10.2 COM 0 sub-menu
Feature Option Description Help text
COM0 Subtitle
Console Redirection
Settings
Subtitle
Terminal Type
VT100, VT100+, VT-
UTF8, ANSI
Emulation: ANSI:
Extended ASCII char set.
VT100: ASCII char set.
VT100+: Extends VT100
to support color,
function keys, etc. VT-
UTF8: Uses UTF8
encoding to map
Unicode chars onto 1 or
more bytes.
Bits per second
9600, 19200, 38400,
57600, 115200
Selects serial port
transmission speed. The
speed must be matched
on the other side. Long
or noisy lines may
require lower speeds.
Data Bits 7, 8 Data Bits
Parity
None, Even, Odd,
Mark, Space
A parity bit can be sent
with the data bits to
detect some
transmission errors.
Even: parity bit is 0 if the
num of 1's in the data
bits is even. Odd: parity
bit is 0 if num of 1's in
the data bits is odd.
Mark: parity bit is always
1. Space: Parity bit is
always 0. Mark and
Space Parity do not
allow for error
detection. They can be
used as an additional
data bit.
Stop Bits 1, 2
Stop bits indicate the
end of a serial data
packet. (A start bit
indicates the
beginning). The
standard setting is 1
stop bit. Communication
with slow devices may
require more than 1 stop
bit.