4 compliance, 5 hot-plug capability, 6 interfacing with the environment – Kontron AT8060 User Manual

Page 20: 1 rtm (rear transition module), 1 standard compliance, 2 serial port feature, Rtm (rear transition module)

Advertising
background image

Product Description

5

AT8060

www.kontron.com

1.4

Compliance

This product conforms to the following specifications:

• PICMG3.0 R3.0(AdvancedTCA Base Specification)

• PICMG3.1 R1.0 Option 1 and 9(Ethernet/Fiber Channel over AdvancedTCA)

• AMC.0 R2.0 (Advanced Mezzanine Card Base Specification)

• AMC.1 R2.0 type 1, 2, 4 and 8 (Advanced Mezzanine Card PCI-Express)

• AMC.3 R1.0 (Advanced Mezzanine Card Storage)

• ACPI rev 2.0

• HPM.1

• IPMI 2.0

1.5

Hot-Plug Capability

The AT8060 supports Full Hot Swap capability as per PICMG3.0 R3.0 for the board itself, the RTM module and
AMC bay. It can be removed from or installed in the system while it is on (without powering-down the
system). Please refer to the PICMG3.0 R3.0 specification for additional details about Hot Swap.

The AT8060 supports PCI-Express Hotplug on AMC B1 and RTM. The IPMC uses the standard PCI Express
Hotplug Controller on the CPU board allowing hot insertion and removal of an AMC or RTM module within the
OS.

1.6

Interfacing with the Environment

1.6.1

RTM (rear transition module)

The AT8060 supports different single slot (6HP) AdvancedTCA Rear Transition Modules: RTM8050 and
RTM806X. These modules provide additional connectivity for AT8060 CPU front blade.

1.6.1.1

Standard Compliance

• PICMG3.0 R3.0 - Advanced Telecommunication Computing Architecture

1.6.1.2

Serial Port Feature

• One serial port available on the RTM face plate through a RJ-45 connector.

Advertising