Kontron AT8060 - Manual (Page 18)

Product Description
3 AT8060
www.kontron.com
1.3 Board Specifications
Table 1-1: Board Specifications
Features Description
Processors
• Dual socket Intel Xeon Processors from the SandyBridge-EP series E5-2600 processor family.
• 8cores 1.8GHz 70W
• 8cores 2.0GHz 95W
• 6cores 2.3GHz 95W
Chipset • Patsburg-B C600 Series
Bus Interface
• Dual QPI 8GT/s between both CPUs
• DMI Gen2 5GT/s from CPU to Chipset
Expansion Slot
• 1 Mid-size AdvancedMC bay with PCIe x8 Gen 2 connection
• PCIe x8 Gen2 connection to RTM
System Memory
• Support of DDR3 1066 to 1600MHz with ECC
• Standard voltage(1.5V) and low-voltage(1.35V) modules are supported
• 4 memory channnels per CPU with a single DIMM location per channel
• Up to 8GB memory modules per socket for a total of 64GB (note: 16GB modules could be
supported in a near future for a total of 128G)
Flash Memory • Two connectors for two optional eUSB (embedded USB) flash drive modules
Storage
• Single SATA GEN1 (1.5Gb/s), GEN2 (3Gb/s) and GEN3 (6Gb/s) on the AMC storage interface.
• Four SATA GEN1 (1.5Gb/s), GEN2 (3Gb/s), GEN3 (6Gb/s) and SAS 3Gb/s storage interfaces on
the RTM.
I/O
• Dual SFP
• Dual USB
• RJ45 Serial Port
• TPM mezzanine
• Video debug port available on the RTM
Board Specifications
• PICMG3.0 R3.0(AdvancedTCA Base Specification)
• PICMG3.1 R1.0 (Ethernet/Fiber Channel over AdvancedTCA)
• AMC.0 R2.0 (Advanced Mezzanine Card Base Specification)
• AMC.1 R2.0 types 1, 2, 4, 8 (Advanced Mezzanine Card PCI-Express)
• AMC.3 R1.0 (Advanced Mezzanine Card Storage)
• ACPI rev 2.0
• HPM.1
• IPMI 2.0
BIOS Features
• AMI UEFI with Compatibility Support Module for legacy option ROMs and Operating System
support
• Save BIOS Configuration to SPI.
• Boot from Ethernet PXE (Base and Fabric interfaces and management Lan)
• Boot from Ethernet iSCSI (Fabric interfaces)
• Boot from SAS/SATA; and boot from USB 2.0 (Floppy, CD-ROM, Hard Disk)
• Diskless, Keyboard less, and battery less operation extensions
• System, video and LAN BIOS shadowing
• Robust BIOS flash Update with rollover capability (HPM.1)
• Field updateable BIOS
• Advanced Configuration and Power Interface (ACPI 2.0, 3.0 & 4.0)
• Console redirection to serial port (VT100)with CMOS setup access, and SOL (Serial over LAN)
• Event (correctable/uncorrectable ECC,PCIe, POST errors); log support to IPMC