Kontron AT8060 - Manual (Page 111)

Software Setup
96 AT8060
www.kontron.com
5.1.5.2 QPI Configuration sub-menu
IOH 0 PCIe port Speed
Control
Subtitle
AMC Port Link Speed GEN1, GEN2, GEN3
Select Target Link Speed
Gen1,Gen2 or Gen3
IOH 1 PCIe port Speed
Control
Subtitle
RTM Port Link Speed GEN1, GEN2, GEN3
Select 'Auto' to check
for T5705 (RTM8050)
and force GEN1 if
detected, else GEN2 is
used. Select 'GEN1' if
Hot-Plug of T5705 is to
be done later.
Feature Option Description Help text
Current QPI Link Speed Display Only Current QPI Link Speed
Current QPI Link Freq Display Only Current QPI Link Freq
Isoc Disabled, Enabled Enbale /Disable Isoc
QPI Link Speed Mode Slow, Fast
Select the QPI link speed
as either the Fast mode
or Slow Mode
QPI Link Frequency Select
Auto, 6.4 GT/s, 7.2
GT/s, 8.0 GT/s
Allows for selecting the
QPI Link Frequency
QPI Link0s Disabled, Enabled
Enable or Disable QPI
Link0s
QPI Link0p Disabled, Enabled
Enable or Disable QPI
Link0p
QPI Link1 Disabled, Enabled
Enable or Disable QPI
Link1
Feature Option Description Help text