Kontron KTAM3874-pITX - Manual (Page 25)

KTD-S0057-I Page 21 U-Boot Bootloader
KTAM3874/pITX Software Guide
Note: Do not start the transmission before all eight C's are visible - otherwise the download can be confused.
Thereafter select the U-Boot-MIN file (normally named 'u-boot.min.uart') and immediately press the Reset
button to start the download process.
The terminal program shows the following result:
Type ' loadb 81000000 ' at the 'TI-MIN#' prompt and press 'Enter'. Then choose the Kermit transfer mode.