Kontron KTAM3874-pITX - Manual (Page 29)

KTD-S0057-I Page 25 U-Boot Bootloader
KTAM3874/pITX Software Guide
5.4 MMC Bootloader
For booting from the microSD TM card you have to change some preferences:
Replug the boot order jumper to MMC x SPI x ... (see User's Guide chapter 'Boot Order').
Rename the U-Boot-MIN file named 'u-boot.min.sd' in 'MLO'.
Format the microSD TM card with FAT16 or FAT32 (Linux ® partitions are not accepted). For
previous Linux ® formatted cards it would be advisable to use for example the 'HP ® USB
Disk Storage Format Tool' otherwise the detection can fail.
Note: You need an active FAT partition.
Copy 'MLO' and u-boot.bin' to the microSD TM card.
After power on U-Boot-MIN (MLO) loads automatically the second part.