Kontron KISS 2U Short KTQ67 - Manual (Page 22)

7. Product Description KISS 2U Short V2 – User’s Guide (V1.00)
7.2.2. System Configuration with Motherboard and Riser Cards
6 11
5
10
6
12
7
9
8
9 8 1
4
2 3 9
Fig. 16: Rear side of the KISS 2U Short V2 (shown as a configuration riser card)
1 Grounding stud
2 Fan of the PSU (AC)
3 ON/OFF switch of the PSU
4 AC-power plug
5 External interfaces of the installed motherboard
6 Air exhaust openings
7 Cut-outs for optional (customer-specific)
interfaces routed to the rear (9-pin D-SUB type)
8 Cover latch with captive knurled screws
9 Centring latches and centring slots
10 Free expansion slots
11 Slide bracket for fixing the expansion cards with
captive knurled screw
12 Onboard serial interface routed to the rear side
(RS232)
Important Note!
The captive knurled screw of the slide bracket (Fig. 16, pos. 11) may not be unscrewed (loosened)
during operation (while the system is connected to the power source and switched on)!
20 www.kontron.com