Kontron M2M Smart Services Developer Kit User Manual User Manual
Page 13
Advertising
13
Table 4. M2M System side view features
Item
Description
Item
Description
A
USB 2.0 Host Port for Serial
Redirection (selected SKUs
only)
D
USB 2.0 Host MicroUSB Port
B
Power
E
2.4 GHz Antenna Connector
(Primary 802.11/Wi-Fi Antenna);
bottom connector is
C
RJ-45 Ethernet Port
F
Auxiliary 3G or Wi-Fi connector
Note that a security slot also is accessible on the bottom of the system.
Caution: The system supports USB OTG (On The Go) devices only when plugged into the host-only (or client-only)
MicroUSB. Early vesions of the Kontron M2M development kit included a small slide switch near the MicroUSB Port
to enable and disable 5V power to the MicroUSB Port. A nearby LED is green if 5V is enabled and amber if 5V is
disabled.
Advertising