Kontron M2M Smart Services Developer Kit User Manual - Manual (Page 33)

33
Next, screw down the 3G module using a torque screwdriver (torque spec. 1.5 inch/pound) and the screw just
removed. Only one corner of the module will be screwed into place, as depicted in Figure 29.
Figure 29. Screw the 3G module into place
5.9 Reattaching the AV board
Now position the AV board for re-attachment with the screw holes aligned to the screw holes on the boards below, as
shown in Figure 30. Do NOT re-insert the spacer. It is no longer needed.
Figure 30. Align the AV board for re-attachment