Kontron NSC2U IP Network Server - Manual (Page 4)

NSC2U Server—Contents
Kontron IP Network Server NSC2U
Product Guide, rev. 1.4 December 2009
4
3.4.1.2 BIOS Select Jumper...................................................................33
3.4.1.3 DCD/DSR Signal Select Jumper ...................................................34
3.4.2 Configuring Memory DIMMs......................................................................35
3.4.2.1
Memory RASUM Features ...........................................................36
3.4.2.2 Supported Memory ....................................................................36
3.4.2.3 DIMM Population Rules and Supported DIMM Configurations ...........37
3.4.2.4 Non-mirrored Mode Minimum Configuration ..................................38
3.4.2.5 Non-mirrored Mode Memory Upgrades .........................................39
3.4.2.6 Mirrored Mode Memory Configuration...........................................40
3.4.2.7 DIMM Sparing Mode Memory Configuration ...................................40
3.4.2.8 Single Branch Mode Sparing ......................................................40
3.4.2.9 Dual Branch Mode Sparing..........................................................41
3.4.3 Installing DIMMs.....................................................................................41
3.4.4 Removing Memory DIMMs........................................................................42
3.4.5 Adding or Replacing a Processor ...............................................................43
3.4.5.1
ESD and Processor Handling Precautions ......................................43
3.4.5.2 Removing a Processor................................................................44
3.4.5.3 Installing a New Processor..........................................................45
3.4.5.4 Inserting the Heat Sink ..............................................................47
3.4.6 Other Installation and Upgrade Options .....................................................48
3.5 Installing the Server into a Rack ..........................................................................48
3.5.1
Connecting the Power Cord ......................................................................48
3.5.2 Equipment Rack Precautions ....................................................................48
4 Optional Component Installations............................................................................50
4.1
Before You Begin ...............................................................................................50
4.1.1
Tools and Supplies Needed.......................................................................50
4.1.2 System References .................................................................................50
4.1.3 Cable Routing Reference..........................................................................50
4.2 Installing or Replacing a PCI Add-in Card ..............................................................51
4.2.1
Riser Card Options ..................................................................................52
4.2.2 Removing the PCI Riser Card Assembly......................................................53
4.2.3 Removing an Add-in Card from the Riser Card Assembly ..............................53
4.2.4 Installing an Add-in Card in the Riser Card Assembly ...................................54
4.2.5 Replacing the Riser Card Assembly on the Server Board...............................55
4.3 Installing an I/O Expansion Module ......................................................................55
4.4 Installing Intel ® Remote Management Modules .....................................................57
4.4.1 Installing the GCM Module .......................................................................57
4.4.2 Installing the RMM Module .......................................................................57
4.5 Installing an RJ45 4xGbE LAN Card for Front Panel Access.......................................58
4.5.1
Installing the LAN Card into the Riser Card Assembly...................................58
4.5.2 Configuring the RJ45 GbE LAN Card ..........................................................59
4.5.3 Routing the LAN Card Cables to the Front Panel ..........................................61
4.5.4 Connecting the GbE LAN Cables to the Front Panel ......................................63
4.6 Installing a Fiber LAN Card for Front Panel Access ..................................................66
4.6.1
Preparing the chassis and removing the PCI card carrier assembly ................66
4.6.2 Prepare the Fiber LAN Card and install it into the chassis..............................74
4.6.3 Install the Front Panel Escutcheon and Connect the Fiber Cables ...................80
4.6.4 Re-assemble the System .........................................................................85
4.7 Installing a SMART Embedded USB Solid-State Drive ..............................................91
4.8 Installing Hardware RAID 5 Components...............................................................92
4.8.1
Installing the RAID Key and RAID DIMM ....................................................93
4.8.2 Installing the RAID Intelligent Battery Backup Unit (IBBU) ...........................93
4.9 Installing an Optical Device .................................................................................95
4.9.1
Removing the Optical Device Filler Panel from the Chassis............................95
4.9.2 Installing a New Optical Device.................................................................96