La-Z-Boy La-Z-Touch Massage System after 08/11/2014 - Manual (Page 5)

9 8
La-Z-Touch ® 2-Motor Massage & Heat Recliner
Assembly Instructions
– To reduce the risk of serious injury:
• Provide a clear path for operation of the back and legrest. Place tables and area rugs
at a distance to allow the legrest to fully extend without rubbing or interference.
WARNING
7. Choose a location for the chair that is close to an electrical outlet. Proceed
to the Operating Instructions.
– To prevent damage to the connectors and cords, it is important
to unfasten all connections prior to removing the back. NOTICE
8. To remove the back, unplug the 120 volt power transformer from the electrical outlet
and disconnect the power transformer from the power supply located behind the chair.
9. Unlock the back brackets by using a screwdriver to push up on the locking levers.
10. Gently pull up on the back of the chair.
La-Z-Touch ® 2-Motor Massage and Heat Power Transformer Specifications:
Input: 100-240V AC 50-60Hz 1.5A
Output: 13.8V DC 2.9A
(Page intentionally left blank)