La-Z-Boy Luxury-Lift Power Recliner - Manual (Page 12)

The seat massage unit
is not connected under
the seat.
(Only applies to 1ML styles.)
1. Unplug the transformer from the wall outlet, and
disconnect from the connector behind the chair.
2. Gently roll the chair forward to rest on the front
arms. The seat massage and heat connectors are
attached to the bottom of the seat springs, under
the chair.
3. The seat massage
connectors are brown.
Push the brown
connectors together
until they lock.
4. Gently roll the chair back
onto the base. Reconnect transformer into
the connector behind the chair, and plug
the transformer directly into a wall outlet.
The back massage unit is
not connected inside the
lower back.
(Only applies to
1ML styles.)
1. Unplug the transformer from the wall outlet, and
disconnect from the connector behind the chair.
2. Gently roll the chair forward to rest on the front
arms. Push the outside back down, toward the
floor, to move the inner body from the outer
body. Lift the lower outside back cover to
separate the fastening tape, and access the
back springs. The back massage and heat
connectors are attached to the back springs.
3. The back massage
connectors are green.
Push the green connectors
together until they lock.
4. Press the fastening tape
together to attach the
lower outside back cover
to the inner body. Lift the back and push the
inner body into the outer body.
5. Gently roll the chair back onto the base.
Reconnect transformer into the connector
behind the chair, and plug the transformer
directly into a wall outlet.
The seat heating pad
is not connected under
the seat.
(Only applies to 1ML
and 1HL styles.)
1. Unplug the transformer from the wall outlet, and
disconnect from the connector behind the chair.
2. Gently roll the chair forward to rest on the front
arms. The seat massage and heat connectors are
attached to the bottom of the seat springs,
under the chair.
3. The seat heating pad
connectors are black
and red. Push the black
and red connectors
together until they lock.
4. Gently roll the chair back
onto the base. Reconnect transformer behind the
chair, and plug the transformer directly into a
wall outlet.
The back heating pad
is not connected inside
the lower back.
(Only applies to 1ML
and 1HL styles.)
1. Unplug the transformer from the wall outlet, and
disconnect from the connector behind the chair.
2. Gently roll the chair forward to rest on the front
arms. Push the outside back down, toward the
floor, to move the inner body from the outer body.
Lift the lower outside back cover to separate the
fastening tape, and access the back springs. The
back massage and heat connectors are attached
to the back springs.
3. The back heating pad
connectors are black
and red. Push the black
and red connectors
together until they lock.
4. Press the fastening tape
together to attach the lower outside back cover
to the inner body. Lift the back and push the
inner body into the outer body.
5. Gently roll the chair back onto the base.
Reconnect transformer into the connector
behind the chair, and plug the transformer
directly into a wall outlet.
step 3 step 3
step 3
step 3
Luxury-Lift ® Power Recliner
Troubleshooting
Luxury-Lift ® Power Recliner
Troubleshooting
(Troubleshooting Continued)
23 22
ERROR
CODE
CAUSE SOLUTION
ERROR
CODE
CAUSE SOLUTION
E39
E40
E41
E42