Opening and closing, Sliding sunroof (coupe) – Mercedes-Benz E-Cab 2014 Owners Manual User Manual

Page 114

Advertising
background image

X

To open and close: turn the SmartKey to

position 1 or 2 in the ignition lock.

X

Press or pull the 3 switch in the

corresponding direction.

i

If you press the 3 switch beyond the

point of resistance, an automatic opening/

closing process is started in the

corresponding direction. You can stop

automatic operation by operating the

switch again.

Operating the roller sunblind for the

panorama roof with power tilt/sliding

panel

Important safety notes

G

WARNING

When opening or closing the roller sunblind,

parts of the body could be trapped between

the roller sunblind and the frame or sliding

sunroof. There is a risk of injury.
When opening or closing make sure that no

parts of the body are in the sweep of the roller

sunblind.
If somebody becomes trapped:

R

release the switch immediately, or

R

during automatic operation, push the

switch briefly in any direction

The opening or closing procedure will be

stopped.

The roller sunblind shields the vehicle interior

from sunlight. The roller sunblind can only be

opened and closed when the panorama roof

with power tilt/sliding panel is closed.

Roller sunblind reversing feature

The roller sunblind is equipped with an

automatic reversing feature. If a solid object

blocks or restricts the roller sunblind during

the closing process, the roller sunblind opens

again automatically. The automatic reversing

feature is only an aid and is not a substitute

for your attentiveness to the roller sunblind

while it is closing.

G

WARNING

The reversing feature especially does not

react to soft, light and thin objects such as

small fingers. This means that the reversing

feature cannot prevent someone being

trapped in these situations. There is a risk of

injury.
When closing make sure that no parts of the

body are in the sweep of the roller sunblind.
If somebody becomes trapped:

R

release the switch immediately, or

R

during automatic operation, push the

switch briefly in any direction

The closing process is stopped.

Opening and closing

Overhead control panel
:

Opening

;

Opening

=

Closing

X

Turn the SmartKey to position 1 or 2 in the

ignition lock.

X

Press or pull the 3 switch in the

corresponding direction.

i

If you press or pull the 3 switch

beyond the point of resistance, an

automatic opening/closing process is

started in the corresponding direction. You

can stop automatic operation by pressing

or pulling again.

112

Sliding sunroof (Coupe)

Opening

and

closing

Advertising
This manual is related to the following products: