Lights and windshiel dw iper s, Replacing bulbs – Mercedes-Benz E-Cab 2014 Owners Manual User Manual
Page 144

The interior lighting automatically switches
on if you:
R
unlock the vehicle
R
open a door
R
remove the SmartKey from the ignition
lock.
The interior light is activated for a short while
when the SmartKey is removed from the
ignition lock. You can activate this delayed
switch-off using the on-board computer
(
Y
page 245).
Manual interior lighting control
Front overhead control panel
:
u To switch the rear interior lighting
on/off (Coupe only)
;
| To switch the automatic interior
lighting control on/off
=
p To switch the right-hand reading
lamp on/off
?
c To switch the front interior lighting
on/off
A
p To switch the left-hand reading lamp
on/off
X
To switch the front interior lighting on/
off: press the c button.
X
To switch the rear interior lighting on/
off (Coupe only): press the u button.
X
To switch the reading lamps on/off:
press the p button.
Crash-responsive emergency lighting
The interior lighting is activated automatically
if the vehicle is involved in an accident.
X
To switch off the crash-responsive
emergency lighting: press the hazard
warning lamp button.
or
X
Lock and then unlock the vehicle using the
SmartKey.
Replacing bulbs
Important safety notes
G
WARNING
Bulbs, lamps and connectors can get very hot
when operating. If you change a bulb, you
could burn yourself on these components.
There is a risk of injury.
Allow these components to cool down before
changing a bulb.
Vehicles with static LED headlamps:
Do not use a bulb that has been dropped or if
its glass tube has been scratched.
The bulb may explode if:
R
you touch it
R
it is hot
R
you drop it
R
you scratch it
Only operate bulbs in enclosed lamps
designed for that purpose. Only install spare
bulbs of the same type and the specified
voltage.
Marks on the glass tube reduce the service
life of the bulbs. Do not touch the glass tube
with your bare hands. If necessary, clean the
glass tube when cold with alcohol or spirit and
rub it off with a lint-free cloth.
Protect bulbs from moisture during
operation. Do not allow bulbs to come into
contact with liquids.
Replace only the bulbs listed (
Y
page 143).
Have the bulbs that you cannot replace
142
Replacing bulbs
Lights
and
windshiel
dw
iper
s