Driving and parking, Driving systems – Mercedes-Benz E-Cab 2014 Owners Manual User Manual

Page 198

Advertising
background image

If DISTRONIC PLUS detects that the vehicle

in front is stopping, it brakes your vehicle until

it is stationary.
Once your vehicle is stationary, it remains

stationary and you do not need to depress the

brake.
Depending on the specified minimum

distance, your vehicle will come to a standstill

at a sufficient distance behind the vehicle in

front. The specified minimum distance is set

using the control on the cruise control lever.
When DISTRONIC PLUS is activated, the

transmission is shifted automatically to

position P if:

R

the driver's door is open and the driver's

seat belt is unfastened.

R

the engine is switched off, unless it is

automatically switched off by the ECO

start/stop function.

R

a system malfunction occurs.

R

the power supply is not sufficient.

Setting a speed

X

Press the cruise control lever up : for a

higher speed or down ; for a lower speed.

X

To adjust the set speed in 1 mph

increments (1 km/h increments): briefly

press the cruise control lever up : or

down ; to the pressure point.

Every time the cruise control lever is

pressed up : or down ;, the last speed

stored is increased or reduced.

X

To adjust the set speed in 5 mph

increments (10 km/h increments):

briefly press the cruise control lever

up : or down ; to the pressure point.

Every time the cruise control lever is

pressed up : or down ;, the last speed

stored is increased or reduced.

i

If you accelerate to overtake, DISTRONIC

PLUS adjusts the vehicle's speed to the last

speed stored after you have finished

overtaking.

Setting the specified minimum distance

You can set the specified minimum distance

for DISTRONIC PLUS by varying the time span

between one and two seconds. With this

function, you can set the minimum distance

that DISTRONIC PLUS keeps to the vehicle in

front, dependent on vehicle speed. You can

see this distance in the multifunction display

(

Y

page 197).

i

Make sure that you maintain a sufficient

distance to the vehicle in front and comply

with the minimum distance as required by

law. Adjust the distance to the vehicle in

front if necessary.

You can set the specified minimum distance

for DISTRONIC PLUS by varying the time span

between one and two seconds. With this

function, you can set the minimum distance

that DISTRONIC PLUS keeps to the vehicle in

front, dependent on vehicle speed. You can

see this distance in the multifunction display

(

Y

page 197).

196

Driving systems

Driving

and

parking

Advertising
This manual is related to the following products: