Footwell temperature, Air flow from air vents, Control systems – Mercedes-Benz CL-Class 2010 Owners Manual User Manual

Page 199: Comand automatic climate control

Advertising
background image

X

Select climate control settings Q Central
climate control menu.

X

Selecting Mono: Slide

Z

V

Æ

or rotate

c

V

d

.

X

Confirming selection: Press W.
A checkmark appears when the function
has been selected.

X

Exiting menu: Press back button % in
the center console (

Y

page 69) or slide

X

V

Y

.

The

Mono function is automatically switched

off when you:

R

change a climate control setting for the
front passenger side using COMAND

R

operate a button from the climate control
for the front passenger side

R

operate one of the buttons for the rear
climate control system

Adjusting footwell temperature

i

In automatic mode, this setting optimizes

the footwell temperature when outside
temperatures are low.

The

Footwell Temperature function is used

to adjust the temperature difference between
the footwell and the rest of the passenger
compartment.
The higher the selected value, the higher the
temperature in the footwell will be.

X

Select climate control settings Q Central
climate control menu.

X

Selecting Footwell Temperature: Slide

Z

V

Æ

or rotate

c

V

d

and then press W.

X

Changing temperature difference: Slide

Z

V

Æ

or rotate

c

V

d

.

X

Exiting menu: Press W, back button
% in the center console (

Y

page 69) or

slide

X

V

Y

.

The setting is saved.

Adjusting air flow from air vents

i

In automatic mode, this setting optimizes

the air flow when outside temperatures are
high.

The

Airflow setting defines air distribution

and air volume in automatic mode:

R

Focused (default setting, increased air
flow)

R

Medium (reduced air flow)

R

Diffuse (minimal air flow)

i

When the interior ambient temperature of

the vehicle is very hot and the climate
control is cooling the interior, the setting
for air flow is temporarily overridden.

X

Select climate control settings Q Central
climate control menu Q Airflow.
A selection list appears.
The current setting is indicated by a
dot #.

COMAND automatic climate control

197

Control systems

216_AKB; 3; 90, en-US
d2ureepe,

Version: 2.11.8.1

2009-05-15T11:47:50+02:00 - Seite 197

Z

Advertising