Spare wheel, Fuels, coolants, lubricants, etc, Capacities – Mercedes-Benz CL-Class 2010 Owners Manual User Manual
Page 492: Coolants, lubricants, etc, Technical data” section, Operator’s manual, Technical data
!
Compare the recommended tire inflation pressure for your vehicle with the tire inflation
pressure on the yellow label located on the spare wheel rim.
If the tire inflation pressure on the yellow label on the spare wheel rim differs from the values
given in this Operator’s Manual, inflate the tire to the recommended tire inflation pressure
given on the yellow label on the spare wheel rim.
i
Please note that the tire inflation pressure of the spare wheel differs from the tire inflation
pressure of the road tires.
All models
Rim
4.5 B x 19 H2
Wheel offset
1.38 in (35 mm)
Minispare tire
56
T 155/70 R19 113M
Recommended tire inflation pressure
61 psi (4.2 bar)
Fuels, coolants, lubricants, etc.
Vehicle components and their respective
lubricants must match. Therefore only use
products tested and approved by Mercedes-
Benz.
For information on tested and approved
products, contact an authorized Mercedes-
only).
Comply with all valid regulations with respect
to handling, storing, and disposing of service
fluids. Otherwise you could endanger persons
or the environment.
Keep service fluids out of the reach of
children.
For health reasons, you should prevent
service fluids from coming into direct contact
with your skin or clothing.
If a service fluid is swallowed, contact a
physician immediately.
Model
Capacity
Fuels, coolants,
lubricants, etc.
Engine with oil
filter
CL 550 4MATIC
9.0 US qt (8.5 l)
Approved engine
oils
CL 600
CL 65 AMG
9.5 US qt (9.0 l)
CL 63 AMG
57
9.9 US qt (9.35 l)
56
Must not be used with snow chains.
57
Engine with oil cooler.
490
Fuels, coolants, lubricants, etc.
Technical data
216_AKB; 3; 90, en-US
d2ureepe,
Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 490