Mercedes-Benz CL-Class 2010 Owners Manual - Manual (Page 485)

Vehicle specification CL 550 4MATIC
(216.386)
The quoted data apply only to the standard
vehicle. Contact an authorized Mercedes-
Benz Center for the corresponding data of all
special bodies and special equipment.
Engine CL 550 4MATIC
Engine, type 273
Mode of operation 4-stroke engine,
gasoline injection
No. of cylinders 8
Bore 3.86 in (98.00 mm)
Stroke 3.56 in (90.50 mm)
Total piston
displacement
333.3 cu in
(5 461 cm 3 )
Compression
ratio
10.7:1
Output acc. to
SAE J 1349
36
382 hp/6 000 rpm
(285 kW/6 000 rpm)
Maximum torque
acc. to SAE J 1349
391 lb-ft/
2 800 - 4 800 rpm
(530 Nm/
2 800 - 4 800 rpm)
Maximum engine
speed
6 500 rpm
Firing order 1-5-4-2-6-3-7-8
Poly-V-belt 2 404 mm
Electrical system CL 550 4MATIC
Alternator 14 V/180 A
Starter motor 12 V/1.7 kW
Battery 12 V/95 Ah
Electrical system CL 550 4MATIC
Spark plugs, type NGK PLKR 7A
Bosch Y 7 MPP33
Spark plugs,
electrode gap
0.031 in (0.8 mm)
Spark plugs,
tightening torque
15 - 18 lb-ft
(20 - 25 Nm)
Main dimensions CL 550 4MATIC
Overall vehicle
length
199.7 in (5 071 mm)
Overall vehicle
width
37
84.2 in (2 139 mm)
Overall vehicle
height
55.8 in (1 418 mm)
Wheelbase 116.3 in (2 955 mm)
Track, front 63.0 in (1 601 mm)
Track, rear 63.3 in (1 607 mm)
Turning circle 38.1 ft (11.6 m)
Weights CL 550 4MATIC
Trunk load max. 220 lb (100 kg)
Vehicle specification CL 600
(216.376)
The quoted data apply only to the standard
vehicle. Contact an authorized Mercedes-
Benz Center for the corresponding data of all
special bodies and special equipment.
36 Premium fuel required. Performance may vary with fuel octane rating.
37 Exterior rear view mirrors folded out.
Vehicle specification CL 600 (216.376)
483
Technical data
216_AKB; 3; 90, en-US
d2ureepe,
Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 483
Z