Radar sensor system, Function, Control systems – Mercedes-Benz CL-Class 2010 Owners Manual User Manual

Page 218: Instrument cluster control system

Advertising
background image

The additional speedometer (

Y

page 215)

will be shown in the other unit.

Switching the radar sensors on or off

If your vehicle is equipped with DISTRONIC
PLUS, BAS PLUS, or Park Assist it is equipped
with a radar sensor system which you can
switch on and off.
When traveling in Canada in a vehicle not
registered in Canada, you must switch off the
radar sensor system. Canadian law does not
permit the use of the radar sensor system for
vehicles from outside of Canada. When you
switch off the radar sensor system, the
following functions are deactivated:

R

BAS PLUS (

Y

page 57)

R

PRE-SAFE

®

Brake (

Y

page 62)

R

DISTRONIC PLUS (

Y

page 304)

R

Park Assist (

Y

page 324)

R

Advanced Parking Guidance (

Y

page 327)

R

Blind Spot Assist (

Y

page 335)

i

USA only:

This device has been approved by the FCC
as a “Vehicular Radar System”. The radar
sensor is intended for use in an automotive
radar system only. Removal, tampering, or
altering of the device will void any
warranties, and is not permitted by the
FCC. Do not tamper with, alter, or use in
any non-approved way.
Any unauthorized modification to this
device could void the user’s authority to
operate the equipment.

i

Canada only:

This device complies with RSS-210 of
Industry Canada. Operation is subject to
the following two conditions:
1. This device may not cause interference,

and

2. this device must accept any

interference received, including

interference that may cause undesired
operation of the device.

Removal, tampering, or altering of the
device will void any warranties, and is not
permitted. Do not tamper with, alter, or use
in any non-approved way.
Any unauthorized modification to this
device could void the user’s authority to
operate the equipment.

X

Press button = or ; to select the
Settings menu.

X

Press button : or 9 to select the
Radar Sensors function.

X

Press button a.

X

Press button a again if you would like
to change the current status.
Depending on the previous status, the

Radar Sensors will be switched on
(

Enabled) or off (Disabled).

i

The selected status of the radar sensors

remains stored in memory even if the
engine is turned off and restarted.

The following message appears in the
multifunction display if the radar sensors are
switched off and you attempt to activate
DISTRONIC PLUS, Park Assist, or PRE-
SAFE

®

Brake:

Radar Sensors

(See Oper. Manual)

Disabled

216

Instrument cluster control system

Control systems

216_AKB; 3; 90, en-US
d2ureepe,

Version: 2.11.8.1

2009-05-15T11:47:50+02:00 - Seite 216

Advertising