Load identification, Dot, tire identification number (tin), See “load identification – Mercedes-Benz M-Class 2010 Owners Manual User Manual

Page 240: Operation, Tires and wheels

Advertising
background image

Index

Speed rating

H M+S

20

up to 130 mph (210 km/h)

V M+S

20

up to 149 mph (240 km/h)

i

Not all M+S rated tires provide special

winter performance. Make sure the tires
you use show M+S and the mountain/
snowflakeimarking on the tire
sidewall. These tires meet specific snow
traction performance requirements of the
Rubber Manufacturers Association (RMA)
and the Rubber Association of Canada
(RAC) and have been designed specifically
for use in snow conditions.

An electronic speed limiter prevents your
vehicle from exceeding a speed of:

R

All models except ML 63 AMG:
130 mph (210 km/h)

R

ML 63 AMG:
155 mph (250 km/h)

R

ML 63 AMG with increased top speed:
171 mph (275 km/h)

The factory equipped tires on your vehicle
may have a tire speed rating above the
maximum speed permitted by the electronic
speed limiter.
Make sure your tires have the required tire
speed rating as specified for your vehicle in
the “Technical data” section (

Y

page 352),

for example when purchasing new tires.
If you are uncertain about the correct reading
of the information given on a tire’s sidewall,
any authorized Mercedes-Benz Center will be
glad to assist you.

Load identification

i

For illustration purposes only. Actual data

on tires are specific to each vehicle and
may vary from data shown in above
illustration.

In addition to the load index, special load
identification : may be molded into the tire
sidewall following the letter designating the
speed symbol B (

Y

page 236).

R

No specification given: absence of any text
(like in above example) indicates a
standard load (SL) tire.

R

XL or Extra Load: designates an extra load
(or reinforced) tire.

R

Light Load: designates a light load tire.

R

C, D, E: designates load range associated
with the maximum load a tire can carry at
a specified pressure.

DOT, Tire Identification Number (TIN)

U.S. tire regulations require each new tire
manufacturer or tire retreader to mold a TIN
into or onto a sidewall of each tire produced.

20

or M+Sifor winter tires

238

Tires and wheels

Operation

164_AKB; 7; 31, en-US
d2ureepe,

Version: 2.11.8.1

2009-09-11T12:07:36+02:00 - Seite 238

Advertising