Mercedes-Benz M-Class 2010 Owners Manual - Manual (Page 271)

X Release securing hook = (located below
the floor handle) from holder.
X Engage securing hook = on upper cargo
compartment lip ?.
! With the cargo compartment cover blind
installed behind the rear seats, disengage
cargo compartment cover blind and flip it
forward. Otherwise the strap of the
securing hook could damage the cargo
compartment cover blind.
! To prevent damage, always disengage the
securing hook from upper cargo
compartment lip and lower the cargo
compartment floor before closing the
tailgate.
Vehicles without spare wheel
i Vehicles without spare wheel are not
factory-equipped with the tools required for
a wheel change such as a jack or a wheel
wrench. Some tools required for a wheel
change are specific to your vehicle.
Contact an authorized Mercedes-Benz
Center to obtain the tools approved for
your vehicle. The illustration shows the
vehicle retrofitted with the necessary tools
for a wheel change.
: Towing eye bolt
;
Alignment bolt
= Jack
?
Fuse chart
A Electric air pump 27
B TIREFIT kit 27
C
Wheel wrench
D Collapsible wheel chock
E
Reversible ratchet for jack
27 ML 350 BlueTEC 4MATIC (Canada vehicles) factory equipped with 20" wheels only.
Where will I find ...?
269
Practical hints
164_AKB; 7; 31, en-US
d2ureepe,
Version: 2.11.8.1
2009-09-11T12:07:36+02:00 - Seite 269
Z