Starter switch positions, Smartkey, Controls in detail – Mercedes-Benz M-Class 2010 Owners Manual User Manual

Page 81

Advertising
background image

Limiting opening height of tailgate

You can limit the opening height of the
tailgate in the upper opening range. This can
be useful, for example, when the space above
the tailgate is not sufficient.

Activating

X

Open the tailgate: Pull on handle

(

Y

page 75) or press and hold button

F on the SmartKey until the tailgate
opens.

X

Stop opening procedure: When the

tailgate is in the desired position, press
tailgate closing switch (

Y

page 77) or pull

on handle once more.

X

You can also press or pull the remote
tailgate opening/closing switch
(

Y

page 78) to stop the opening procedure.

X

Press and hold the tailgate closing switch
in the tailgate (

Y

page 77) until you hear a

short acoustic signal.
The opening height of the tailgate is limited.
The tailgate will now stop at the stored
position when opened.

Deactivating

X

Press and hold the tailgate closing switch
in the tailgate (

Y

page 77) until you hear

two short, consecutive acoustic signals.

Starter switch positions

SmartKey

G

Observe Safety notes, see page 55.

Starter switch
g

For removing SmartKey

1

Power supply for some electrical
consumers, e.g. radio

2

Ignition (power supply for all electrical
consumers) and driving position

3

Starting position

When you switch on the ignition, all lamps
(except low-beam headlamp indicator lamp,
high-beam headlamp indicator lamp, and turn
signal indicator lamps unless activated) in the
instrument cluster come on. If a lamp in the
instrument cluster fails to come on when the
ignition is switched on, have it checked and
replaced if necessary. If a lamp in the
instrument cluster remains on after starting
the engine or comes on while driving, refer to
“Lamps in instrument cluster” (

Y

page 297).

X

Always remove the SmartKey from the
starter switch when the engine is not in
operation.
This will help to prevent accelerated vehicle
battery discharge or a completely
discharged vehicle battery.

If the SmartKey cannot be turned in the
starter switch, the vehicle battery may not be
sufficiently charged.

X

Check the vehicle battery and charge it if
necessary.

or

Starter switch positions

79

Controls in detail

164_AKB; 7; 31, en-US
d2ureepe,

Version: 2.11.8.1

2009-09-11T12:07:36+02:00 - Seite 79

Z

Advertising