Mercedes-Benz M-Class 2010 Owners Manual - Manual (Page 272)

Vehicles with spare wheel
Example illustration
:
Electric air pump 28
;
Storage well casing
= Alignment bolt
?
Towing eye bolt
A Wheel wrench
X To access remaining tools: Remove
storage well casing ; (if so equipped).
X Remove the spare wheel ( Y page 271).
Example illustration
B
Jack
C Collapsible wheel chock
D
Fuse chart
E Spare wheel bolts 29
F Reversible ratchet for jack
Collapsible wheel chock
The collapsible wheel chock serves to secure
the vehicle, e.g. while changing a wheel.
X Take the collapsible wheel chock from the
vehicle tool kit (
Y page 268).
X Setting up: Tilt both plates upward :.
X Fold the lower plate outward ;.
X Guide the tabs of the lower plate all the way
into the openings of base plate =.
For information on where to place wheel
chocks when changing a wheel, see “Lifting
the vehicle” (
Y page 324).
Jack
G Warning!
Only use the jack supplied with your vehicle
to lift the vehicle briefly for wheel changes. If
you use the jack for any other purpose, you or
others could be injured, as the jack is
designed only for the purpose of changing a
wheel.
When using the jack, observe the safety notes
in the “Mounting the spare wheel” section and
the notes on the jack.
X Take the jack from the vehicle tool kit
(
Y page 268).
28 Vehicles with spare wheel with collapsible tire only.
29 Vehicles with Minispare wheel only.
270
Where will I find ...?
Practical hints
164_AKB; 7; 31, en-US
d2ureepe,
Version: 2.11.8.1
2009-09-11T12:07:36+02:00 - Seite 270