NUU Riptide User Manual

Page 9

background image

3. If the NUU Riptide did not automatically enter pairing mode,
press and hold the Action Button for about 3 seconds. You
will hear a double-beep (low-low) and the Bluetooth Status Light
will flash quickly. The NUU Riptide is now in pairing mode.

4. Enable Bluetooth on your phone or other device.* Then select
“NUU Riptide” from the list of discoverable devices.

5. If prompted for a PIN code, enter “0000” (4 zeros).
6. It will take between 10 and 15 seconds for the NUU Riptide to
pair with your device. When pairing is successful, you will hear a
high tone and the Bluetooth Status Light will remain steadily lit.

*Procedures for activating Bluetooth will vary across devices. Consult the
documentation that came with your device for further information.


Riptide_UserManual_Final.indd 9

7/17/2014 3:07:12 PM