Rice Lake 820i Programmable Indicator/Controller - Installation Manual - Manual (Page 42)

38 820i Installation Manual
LATUDE 45
0–90 Latitude. Specify the latitude of the scale site in degrees. This parameter is shown only if
LOCALE=ON.
ELEVAT 345
±0–9999 Elevation. Specify the elevation of the scale site in meters. Valid values are –9999 through
9999. This parameter is shown only if LOCALE=ON.
IMAGE NEGATIVE
POSITIVE Specifies whether the indicator display is presented as blue-on-white or white-on-blue.
The default value, NEGATIVE, shows the standard blue-on-white image when using the
stock LCD display; the optional outdoor display shows white-on-blue. When using the
outdoor display, set this value to POSITIVE to show the standard, blue-on-white display
image, then use the CONTRAST parameter on the DISPLAY menu to adjust for optimal
viewing.
Level 3 submenus
DATEFMT MMDDYYYY
DDMMYYYY
YYYYMMDD
YYYYDDMM Specifies the format used to display or print the date.
DATESEP SLASH
DASH
SEMI Specifies the date separator character.
TIMEFMT 12HOUR
24HOUR Specifies the format used to display or print the time.
TIMESEP COLON
COMMA Specifies the time separator character.
FEATURE Menu
Parameter Choices Description
Table 3-7. FEATURE Menu Parameters (Continued)