2 devicenet led status indicators and connector – Rice Lake 880 Performance Series Panel Mount Indicator/Controller - DeviceNet Interface Option Installation and Programming Manual User Manual
Page 11
Installation
7
2.2
DeviceNet LED Status Indicators and Connector
An LED array on the DeviceNet module provides status information for
troubleshooting.
•
LED 1 provides network status;
•
LED 2 provides status indication for the DeviceNet module.
Figure 2-10. DeviceNet Status LED Module
Network Status LED (Item 1)
Module Status LED (Item 2)
Status
Description
Off
Not powered or not online
Steady Green
Online, connected
Flashing Green
Online, not connected
Steady Red
Critical link failure
Flashing Red
Connection time-out
Alternating Red/
Green
Self test
Table 2-1. Module and Network Status LED Indications
Status
Description
Off
No power to module
Steady Green
Module operational
Flashing Green
Missing or incomplete configuration,
device needs commissioning
Steady Red
Unrecoverable fault
Flashing Red
Recoverable fault
Alternating Red/
Green
Self test
1
2
3