SINGER 8780 CURVY User Manual

Page 16

Advertising
background image

16

WINDING THE BOBBIN

1. Place a spool of thread on the spool pin, and secure it with

the spool pin cap. Pull the thread out from the spool and

place it through thread guides as shown in illustration.

2. Put end of thread through the hole in bobbin as shown.

3. Push bobbin winder shaft to far left position, if it is not

already there. Place bobbin onto shaft with end of thread

coming from top of bobbin. Push bobbin winder shaft to the

right until it clicks. Hold onto end of thread.

4. Start machine. After the bobbin has begun to fill, stop to cut

the thread tail. Step on the foot control again to continue

to fill the bobbin. The bobbin will automatically stop turning

when completely filled. Push shaft to the left to remove

bobbin and cut thread.

Be sure to use Class 15 J bobbins.

1

2

3

4

Advertising