SINGER 7470 CONFIDENCE - Manual (Page 12)


SPOOL PINS
HORIZONTAL SPOOL PIN for normal
thread spool
Place thread spool on the pin and secure with a spool cap to
ensure smooth flow of thread. If the thread spool has a thread
retaining slit, it should be placed to the right.
Select the correct spool pin cap according to the type and
diameter of spool being used. The diameter of the spool pin
cap should always be larger than that of the spool itself.
PRESSER FOOT LIFTER
There are three positions for your presser foot.
1. Lower the presser foot to sew.
2. Raise the lifter to the middle position to insert or remove
fabric.
3. Lift it to its highest position to accommodate thicker fabrics.
FEED DOG CONTROL
The feed dogs control the movement of the fabric that is being
sewn. They should be raised for all general sewing purposes
and lowered for darning or free-motion sewing so that you, not
the feed dogs, are guiding the fabric.
VERTICAL SPOOL PIN for large thread
spool
Attach the spool pin and place a felt disc over it. Place a spool
of thread on the spool pin.
Spool pin cap
Couvre-fil
Tapa del pasador carrete
Spool
Bobine
Carrete
Spool pin
Porte-bobine
Pasador carrete
Spool pin felt discs
Rondelle feutre
Disco del pasador carrete
Vertical spool pin
Porte-bobine vertical
Pasador de carrete vertical
Spool
Bobine
Carrete
Thread retaining slot
Fente de retenue de fil
Ranura de retención de hilo