SINGER 7465 CONFIDENCE User Manual

Page 18

Advertising
background image

6

WINDING THE BOBBIN

1. Place a spool of thread on the spool pin, and secure it with

the spool pin cap. Pull the thread out from the spool and
place it through thread guides as shown in illustration.

2. Put end of thread through the hole in bobbin as shown.

3. Push bobbin winder shaft to far left position, if it is not

already there. Place bobbin onto shaft with end of thread
coming from top of bobbin. Push bobbin winder shaft to the
right until it clicks. Hold onto end of thread.

4. Start machine and the bobbin starts to wind. Bobbin will

automatically stop turning when completely filled. Push
shaft to the left to remove bobbin and cut thread.





3

4

Advertising