Multi-stitch zig-zag, Bar tack – SINGER 1507 User Manual

Page 59

Advertising
background image

52

GB

Multi-stitch zig-zag

Sewing on lace and elastic, darning, mending, reinforcing edges.
Set the stitch pattern dial to " ".

Place patch in position. The stitch length can be shortened to

produce very close stitches. (1)

When mending tears, it is advisable to use a piece of backing

fabric to reinforce. The stitch density can be varied by adjusting

the stitch length. First sew over the center and then overlap on

both sides. Depending on the type of fabric and damage, sew

between 3 and 5 rows. (2)

Bar tack

Set the stitch pattern dial to " " or " ".

Set the stitch length dial to "1" - "1.5".

This function is used to secure the tops of kick pleats, as well as

pocket openings. First use a straight stitch across the top of the

pocket or pleat. This seam should be approximately 1/4 to 1/2

of an inch long. Set stitch to zigzag and stitch over the straight

stitch backstitch at the beginning and end of stitch to secure

ends.

1

2

0

1

2

3

4

Advertising