SINGER 30215 - Manual (Page 15)

2 & 5 Stitch Pattern
Machines
THREADING MACHINE
1. 2. 3.
1. Turn power off.
2. Raise needle.
3. Raise presser foot.
4. Raise spool pin and Place felt and thread onto
spool pin.
5. Pull thread into thread guide.
6. Follow arrows, guide thread into threading channel
and up to take-up lever (1).
7. Thread take-up lever eye (1). (Take-up lever is
slotted for easier threading) Pull down 6"~8"" of
thread. (Thread should be easy to pull) Lower
presser foot and again pull down 6"~8" of thread.
(Thread should be more difficult to pull) If thread is
difficult to pull, tension discs are threaded properly.
Continue to step 8. If thread pulls the same with
presser foot up or down go back to step 6 and
rethread ensuring thread is pulled into tension disc
channel (2).
8. Pull thread through thread guide.
9. Thread needle from front to back.
15