SINGER 30215 - Manual (Page 8)

2 & 5 Stitch Pattern
Machines
CONNECTING MACHINE
Before plugging in your machine, be sure that the
voltage and number of cycles indicated on the
electrical data table (1), conform to your electrical
power supply.
Plug the controller (2), into the receptacle, at the right
end of the machine.
Then connect the electrical power cord plug (3), to
your electrical outlet.
RUNNING MACHINE
Power on - press " I " side of switch.
Power off - press "O" side.
Press speed controller to run machine. The harder
you press, the faster machine will sew.
8