Sewing buttonholes, 2 & 5 stitch pattern machines – SINGER 30215 User Manual

Page 24

Advertising
background image

2 & 5 Stitch Pattern
Machines

SEWING BUTTONHOLES

SETTINGS:

Pattern: Zig-Zag

Presser foot: Special Purpose presser foot

Needle position: Left needle position

Stitch length:

Step 1

Mark buttonhole length on fabric. Set stitch width to
leg graphic. Stitch down to point (A) and leave needle
in fabric.

Step 2

Raise presser foot and turn fabric clockwise around
needle.

Sew one stitch bringing needle to point (B) and raise
needle close to fabric.

Step 3

Set stitch width to bar tack graphic. Wider setting
(towards right) makes larger buttonhole and wider
cutting space. Moving needle to opposite side above
point (C).

Raise presser foot, adjust fabric slightly and lower
needle into point (C). Lower presser foot.

Make 4 or 5 stitches, ending at point (D).

Step 4

Set stitch width to leg graphic. Stitch down to point (E)
and raise needle close to fabric.

Step 5

Set stitch width to bar tack graphic. Make 4 or 5
stitches.

To secure stitching move stitch width selector to and
take 3-4 stitches.

Raise needle and presser foot. Remove fabric from
machine, clip thread ends and cut buttonhole
opening.

24

Advertising
This manual is related to the following products: