SINGER 4166 - Manual (Page 31)

-29-
SCALLOP STITCH
CONTINUOUS DECORATIVE PATTERN
allowance of 3mm (1/8") for seaming.
Use the satin foot for continuous decorative stitch patterns.
This foot has a full indentation on the underside to permit
easy over closely spaced zigzag stitches, and even feed of
the fabric.
A.To tailor the continuous decorative stitch pattern,you may
adjust the length and width of pattern.Also you may sew
mirror stitch of pattern.Experiment with fabric scraps until
you get the dasired length and width.
SEWING LIGHT WEIGHT FABRICS
When sewing light weight fabrics, it is suggested that you use
interfacing on the backside of the fabric.
This stitch is used to sew edge on women
and children`s wear and table cloths.
SCALLOP HEM
1.Fold the fabric right sides together in and
sew along the edge.
2.Cut the fabric along the seam leaving an
3.Turn fabric over and push out the curved
seam to the surface and press it.
Notch the allowance.
Wrong side
of fabric Wrong side
of fabric
Stitch length Stitch width
66
53