SINGER 5554 Heavy Duty Combo - Manual (Page 31)

24
How to Choose Your Pattern EN
c
e
d
a b
The diagram on this page display the stitch patterns available on the
machine.
Stitches in the top of the diagram are indicated on the pattern
selector dial in gray. To select the patterns indicated with the gray
color, turn the pattern selector dial. (e)
To obtain the other patterns, turn the stitch length dial to "S1" or
"S2", select the pattern desired with pattern selector dial, and adjust
the stitch width with the stitch width dial.
The pattern selector dial may be turned in either direction.
a. Reverse sewing lever
b. Three needle position dial
c. Stitch width dial
d. Stitch length dial
e. Pattern selector dial
For top row stitches B, C, D, E, I, J, and K follow these steps:
- Set the Three Needle Position Dial (b) to the Center.
- Set the Stitch Width Dial (c) to 6. This will give you the widest stitch.
If you would like a narrower stitch, set the Stitch Width Dial to
between 1 and 5.
- Set the Stitch Length Dial (d) to 2. You can adjust the density by
moving the Stitch Length Dial to 1 to make the stitching closer, or
towards 4 to make it longer.
For top row stitches F, G, and H follow these steps:
- Set the Three Needle Position Dial (b) to the Center.
- Set the Stitch Width Dial (c) to 6. This will give you the widest stitch.
If you would like a narrower stitch, set the Stitch Width Dial to
between 1 and 5.
- Set the Stitch Length Dial (d) to 1. You can adjust the density by
moving the Stitch Length Dial to 0.5 to make the stitching closer.
Further instructions for setting the stitch width & the stitch length
dials can be found on page 28. B A I K D C J E G F H
S 1
B A I K D C J E G F H
S 2
B A I K D C J E G F H