SINGER 7322-WORKBOOK Quantum Décor - Manual (Page 27)

25
Ribbing Application
(Quantum Décor model only)
Machine Set Machine Set Machine Set Machine Set----Up: Up: Up: Up:
Stitch: Red Stretch “G”, Overedge stitch
Stitch Width: 7
Stitch Length: Red “S”
Presser Foot: Standard Foot
Materials: Materials: Materials: Materials:
6” X 6” Medium to heavy weight knit fabric or polar fleece
3” X 6” Ribbing
Procedure: Procedure: Procedure: Procedure:
Cut a curve in the knit fabric to resemble a neckline.
Fold ribbing in half lengthwise.
Starting at the left side of the knit curve, place ribbing on front side of
curve.
Match all 3 cut edes and place under the foot.
Line up fabric edges with guide on foot and stitch the length of the seam.
Stretch ribbing slightly to fit the cut edge of the knit.
When finished, lift foot and pull threads and fabric straight back behind
foot and trim.
Note: Note: Note: Note: The Overedge Stretch Stitch makes sewing seams in knits look as
though they were finished on a serger. This stitch is stronger and more durable
than overlock/serger stitching....