Button sewing – SINGER 7322-WORKBOOK Quantum Décor User Manual

Page 8

Advertising
background image

6

Button Sewing

Machine Set

Machine Set

Machine Set

Machine Set----Up:

Up:

Up:

Up:

Stitch:

“B”, Zigzag

Stitch Width:

Determined by button (usually 3mm)

Stitch Length:

(does not apply because feed dogs are lowered)

Feed Dogs:

Down Position

Presser Foot:

Button Sewing Foot

Materials:

Materials:

Materials:

Materials:

Home Décor fabric or shirting

(1) two-hole button

Procedure:

Procedure:

Procedure:

Procedure:

Fold fabric in half and place under foot.
Position the button on the fabric so that the holes in the button are

between the toes of the foot.

Lower the presser foot to hold the button in place.
Turn the hand wheel forward, adjust so that the needle goes into either

the right or left hole.

Adjust the stitch width dial to fine tune the swing of the needle into the

other hole.

Recheck the swing of the needle into the other hole. Now use the foot

control to stitch 6-8 stitches.

Use buttonholes and decorative
buttons for versatile and stylish
tabs on curtains.

Advertising
This manual is related to the following products: