SINGER CSP1 PRO6S Compact Steam Press - Manual (Page 17)

MODEL CSP1
Using the Pressing Cushion
Certain garment construction details such as darts,
curved seams, and shoulder caps are not intended to
be pressed flat. A Pressing Cushion has been
supplied with your Press for use on these areas. Use
the Cushion whenever pressing areas where no
creases are desired and to shape tailored garments.
1. Place the area to be pressed on the Ironing Board.
2. Place Pressing Cushion under the dart, curved
seam, etc.
3. Lower Pressing Plate. Since the cushioned area is
raised, it is the only area which the Plate will contact.
4. Raise Pressing Plate after a few seconds.
IMPORTANT: The Pressing Plate and Ironing Board
cannot be locked for Automatic Maximum Pressure
position when using the Pressing Cushion. Attempting
to lock into Automatic Maximum Pressure position can
damage the Press.
17
Previous Page | Table of Contents | Back to Manual Index | Download Manual in PDF Format | Next Page