SINGER CSP1 PRO6S Compact Steam Press - Manual (Page 9)

MODEL CSP1
4. Temperature Selection
Turn the Temperature Control Dial 'A' until the arrow points to the number of
dots which correspond to your fabric. (Compare garment label to Fabric
Chart 'B'. If your are unsure of the fiber content of your fabric, try a low
setting first and gradually increase until the desired results are obtained.)
After several minutes the Ready Light 'C' will come on. This indicates that
the pressing Plate temperature has increased to the selected setting.
NOTE: The Pressing Plate must be in the up position until it reaches the
selected temperature.
If you have decreased the temperature setting, allow the Pressing Plate to
cool before pressing. Wait for the Ready Light to relight at the new setting. It
is for this reason that we recommend pressing fabrics which require low
temperatures first (NYLON) and gradually increasing the temperature as
needed.
09