SINGER PSW 1.00-WORKBOOK - Manual (Page 20)

15
USING THE NEEDLE THREADER
2 The needle threader automatically turns to the
threading position and the hook pin passes
through the needle eye.
3 Take the thread in front of the needle.
4 Hold the thread loosely and release the lever
slowly. The hook will turn and pass the thread
through the needle eye forming a loop.
Pull the thread through the needle eye.
Raise the needle to its highest position and
lower the presser foot.
1 Lower the needle threader lever slowly and
draw the thread through the thread guide as
illustrated and then to the right.
Attention: Turn power switch to the off
position ("O").
1
2
3
4
2
3
4
1