SINGER PSW 1.00-WORKBOOK - Manual (Page 38)

33
Adjusting the stitch width
The maximum zigzag stitch width for zigzag stitching
is "7.0"; however, the width can be reduced on any
patterns. The width increases as you press the " + "
of stitch width adjustment button from "0.0-7.0".
Adjusting the stitch length
The density of zigzag stitches increase as the setting
of stitch length approaches "0.3".
Neat zigzag stitches are usually achieved at "1.0-2.5".
Closed up zigzag stitches (close together) are
referred to as a satin stitch.
7.0 5.0 3.0 1.0
4.5 3.0 2.0 1.0 0.5
0.0
T
Changing the needle position
These setting apply only to
. The pre-set position is "3.5", center
position. When you press the " " of stitch width
adjustment button, the needle position will be moved
to the left. When you press the " + " of stitch width
adjustment button, the needle position will be moved
to the right. On the LCD screen, the point illustration
and the number indicate the needle position.
–
Direct Patterns 1-4, or A
Group Pattern 00
Changing the stitch length
To shorten the stitch length, press the "
" of stitch
length adjustment button. For a longer stitch length,
press the " + " of stitch length adjustment button.
Generally speaking, the thicker the fabric, thread and
needle, the longer the stitch should be.
–
4.5 3.0 2.0 1.0 0.5
0.0 2.0 3.5 5.0 7.0
A-00
ZIGZAG STITCHES
NEEDLE POSITION AND STITCH LENGTH
T