SINGER PSW 1.00-WORKBOOK - Manual (Page 50)

45
DARNING STITCH
Please Note: When lowering the presser foot,
do not push in the front of the presser foot,
otherwise the darning will not be sewn with
the correct size.
5 Position the fabric so that the needle is 2mm
(1/16 inch) in front of the area to be darned,
and then lower the presser foot lever.
7 Darning stitches are sewn from the front of
the presser foot to the back, as shown.
7
8 If the area to be sewn is large, you may sew
several times across the area to achieve the
desired result.
8
5
Please Note: When you select any
buttonhole pattern or darning pattern, the
LCD screen will display the figure "
" to
remind you to lower the buttonhole lever.
6 Pass the upper thread down through the
hole in the presser foot. Pull down the
buttonhole lever. The buttonhole lever is
positioned behind the bracket on the
buttonhole foot. Gently hold the end of the
upper thread in your left hand, and then
start sewing.
6
8
7
2mm
5
6