SINGER 3323S TALENT Instruction Manual - Manual (Page 48)

Free Motion Darning, Stippling
Darning:
Install the darning plate. (1)
Remove the presser foot shank. (2)
Attach the darning/ embroidery foot to the presser foot bar.
The lever (a) should be behind the needle clamp screw (b).
Press the darning/ embroidery foot on firmly from behind with
your index finger and tighten the screw (c). (3)
For darning, first sew around the edge of the hole (to secure
the threads). (4)
First row: Always work from left to right. Turn work by 90° and
sew over previous stitching. A darning hoop is recommended
for easier sewing and better results.
Free motion darning is accomplished without the sewing
machine internal feed system. Movement of the fabric is
controlled by the operator. It is necessary to coordinate
sewing speed and movement of fabric.
Using the darning/
embroidery foot will help guide you as you sew, in a meandering
fashion to create small curving lines to hold layers of fabric and
batting together.
Note:
Stippling:
Set the machine for straight stitch.
2
a
b
c
4
3
41
1
EN