Tjernlund DJ-3, D-3, HD, I, IL, XL Draft Inducer 8504003 Rev A 07/00 User Manual
Page 12
MODEL HD ONLY
Belts should be checked and adjusted at least once a year. Replace worn belts immediately. When either belt needs replacement, a
matched pair of new belts must be installed.
HOW TO OBTAIN SERVICE ASSISTANCE
1.
If you have any questions about your Draft Inducer or if it requires adjustment, repair or routine maintenance, we suggest that
you contact your installer, plumbing contractor or service agency.
2.
If you require technical information contact Tjernlund Products, Inc. at 1-800-255-4208.
When contacting Tjernlund Products, Inc., please have the following information available:
1.
Model number of the Draft Inducer
2.
Name and address of installer and service agency
3.
Date of original installation and dates any service work was performed
4.
Details of the problem
LIMITED PARTS WARRANTY AND CLAIM PROCEDURE
Tjernlund Products, Inc. warrants the components of its products for one year from date of installation. This warranty covers defects
in material and workmanship. This warranty does not cover normal maintenance, transportation or installation charges for replace-
ment parts or any other service calls or repairs. Products that are tampered with, damaged, installed improperly, wired incorrectly or
defective due to malfunctioning appliances are not covered under this warranty. This warranty DOES NOT cover the complete Draft
Inducer if it is operable, except for the defective part.
Tjernlund Products, Inc. will issue credit to the original distributor or provide a free part to replace one that becomes defective during
the one year warranty period. If the part is over 18 months old, proof of date of the installation in the form of the contractor sales /
installation receipt is necessary to prove the unit has been in service for under one year. All receipts should include the date code of
the Draft Inducer to ensure that the defective component corresponds with the complete unit. This will help preclude possible credit
refusal.
After the faulty component is determined, return it to your Tjernlund distributor for replacement. Please include Draft Inducer date
code component was taken from. The date code is located on the electrical box coverplate or back of motor mount plate. If Draft
Inducer date code is older than 18 months you will need to provide a copy of the original installation receipt to your distributor. Credit
or replacement will only be issued to a Tjernlund distributor after the defective part has been returned prepaid to Tjernlund.
REPLACEMENT PARTS
11
TJERNLUND LIMITED ONE YEAR WARRANTY
Tjernlund Products, Inc. warrants to the original purchaser of this product that the product will be free from defects due to faulty material or workmanship for a peri-
od of (1) year from the date of original purchase or delivery to the original purchaser, whichever is earlier. Remedies under this warranty are limited to repairing
or replacing, at our option, any product which shall, within the above stated warranty period, be returned to Tjernlund Products, Inc. at the address listed below,
postage prepaid. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF, AND TJERNLUND PRODUCTS,
INC. EXPRESSLY DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF THIS PRODUCT. THIS WAR-
RANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES AND NO AGENT IS AUTHORIZED TO ASSUME FOR US ANY LIABILITY ADDITIONAL TO
THOSE SET FORTH IN THIS LIMITED WARRANTY. IMPLIED WARRANTIES ARE LIMITED TO THE STATED DURATION OF THIS LIMITED WARRANTY.
Some states do not allow limitation on how long an implied warranty lasts, so that limitation may not apply to you. In addition, some states do not allow the exclu-
sion or limitation of incidental or consequential damages, so that above limitation or exclusion may not apply to you. This warranty gives you specific legal rights
and you may also have other rights which may vary from State to State. Send all inquiries regarding warranty work to Tjernlund Products, Inc. 1601 9th Street,
White Bear Lake, MN 55110-6794. Phone (651) 426-2993 • (800) 255-4208 • Fax (651) 426-9547 or email us at [email protected].
MODEL DJ-3
PART NUMBER DESCRIPTION
950-3010
WHEEL KIT
950-3020
MOTOR KIT
MODEL D-3
PART NUMBER DESCRIPTION
950-3012
WHEEL KIT
950-3022
MOTOR KIT
MODEL I
PART NUMBER DESCRIPTION
950-4010
WHEEL KIT
950-4020
MOTOR KIT
950-0131
CANADIAN MOTOR KIT
950-4025
SHAFT EXT. KIT
MODEL IL
PART NUMBER DESCRIPTION
950-5010
WHEEL KIT
950-4020
MOTOR KIT
950-0131
CANADIAN MOTOR KIT
950-4025
SHAFT EXT. KIT
MODEL XL
PART NUMBER DESCRIPTION
950-6010
WHEEL KIT
950-1017
MOTOR KIT
950-6025
SHAFT EXT. KIT
MODEL HD
PART NUMBER DESCRIPTION
950-1074
WHEEL KIT
950-0151
MOTOR KIT
950-0117
BELT KIT
950-0106
MOTOR SHEAVE KIT
950-0104
SHAFT SHEAVE KIT