Tjernlund DJ-3, D-3, HD, I, IL, XL Draft Inducer 8504003 Rev A 07/00 User Manual
Page 5
Advertising
4. Do not use “bullhead” tees when connecting two smoke pipes together. When tees are necessary, connect at 45
O
degree angles or
less. If change in smokepipe size is required, use a tapered increaser or reducer.
4
NOTE: Inducer is shown tilted in above pictures to show slot. Actual installation must have shaft horizontal.
SIMPLE INSTALLATION
INSTALLATION POINTERS
SPECIAL APPLICATIONS
1. CUT SLOT IN PIPE
2. INSERT INDUCER
3. INSTALL BANDS
ONE INDUCER
FOR SEVERAL
HEATERS
BELT DRIVEN MODEL HD
ALLOWS FOR RECESSED
MOUNTING FOR USE WITH
ROUND METAL OR
MASONRY VENTS
(Model DJ-3 & D-3
fastened with screws)
Advertising